Engineered And Solid - Urethane Based Flooring Adhesive - STAUF PUM-950 - 3G

STAUF PUM-950

Power-Mastic provides a tremendous improvement for urethane adhesives. It is a urethane based, high-strength adhesive for professional wood flooring installation. But unlike other Urethane adhesives, it contains no isocyanates, the primary chemical in other urethane adhesives that will etch fine floor finishes and is a suspected carcinogen.

Long open time allows for easy installations. Since there is no water or solvent present, it will not cause dimensional changes to wood flooring at installation. It has a higher shear strength than competitors, so it grabs, holds and keeps wood floors in place. This adhesive is waterproof when fully cured and will not dissolve if it gets wet. This adhesive has earned the highest GEV-EMICODE EC 1 ranking by the European Association for Control of Emissions for Flooring. See www.emicode.com for information

The adhesive spreads easily and has a non-slump formula that will help insure contact and adhesive transfer. It allows fast installation even with complicated patterns due to its strong green grab. There is no ash time required, so installation can commence immediately. Rolling is neither required nor recommended. It offers superior flexibility and is designed to keep the flooring in place, yet allow for normal movement during seasonal changes to the flooring.

General Features:

• LEED qualied
• contains no isocyanates
• contains no water
• high shear strength
• contains no solvents
• contains no VOC
• certied "green"
• certied "very low emission"
• nonflammable
• high solids content
• ozone friendly
• Freeze/thaw stable Installation Features:
• wet lay - no ash time required • strong green grab
• non-slump formula • bridges normal sub floor variations
• very low odour
• cleans with acetone
• no rolling required
• excellent spread rate
• long open time
• spreads easily
• higher temp & RH will shorten drying time
• No risk of sensitization Long Term Features:
• Resistant against aging
• Remains elastic
• Suitable for radiant heat systems with primer
• Allows normal dimensional changes in wood flooring
• adhesive is waterproof when cured
• No health hazards
• Stronger shear strength reduces cupping
• moisture barrier up to 10# or 88%

Product Usage:

Approved Flooring:

• Engineered Wood Flooring
• Strip Flooring
• Shorts • Planks
• Parquet
• Solid Wood Flooring must be straight and flat
• Bamboo Flooring (except Stranded Bamboo) Approved Sub Floors:
• Concrete Slabs
• OSB (underlayment grade)
• Plywood (underlayment grade)
• Vinyl (well bonded, grinded, tested negative for asbestos)
• Ceramic Tiles
• Stone, Terrazzo
• Cured Levelling Compounds
• Radiant Heated Sub Floors
• Wet Concrete Slab up to 10#/24hrs/1,000SF and 88% RH Approved Trowels:
• Engineered Floors-#14 up to 85 SF/gal.
• Engineered Floors-#5 up to 60 SF/gal.
• Solid Floors-#4 up to 50 SF/gal.
• Moisture Barrier-#12 up to 35 SF/gal.
• Underlayments-#15 up to 100 SF/gal. Packaging Size:
• 3 gal. Plastic Pail • 48 per pallet Approved Primers:
• Primer is normally not required
• STAUF AQP-200 Eco-Prime Approved Sealers:
• STAUF ACS-210 True-Seal Approved Levelling Compounds:
• STAUF QFP-520 Quick Floor Patch
• STAUF SLC-540 Self Levelling Compound
• STAUF QFF-560 Quick Feather Float
• STAUF ULC-500 Universal Levelling Compound

Technical Sheet: Click Here

Covers Up To 255 SqFt***

***COVERAGE PER PAIL IS APPROXIMATE ONLY - CAN VARY DEPENDING ON INSTALLER & TROWEL USED

Return policies vary by supplier. Please confirm your supplier's return policy prior to placing your order.